13260 Marigold St. NW
Minneapolis, MN 55448

Contact Us

Contact Us


Send

LIFEPAK CR Plus AED

Lifepak CR Plus Fully Auto:

$1795

LifePak CR Plus

Single person response for sudden cardiac arrest.

Featuring the same advanced technology trusted by emergency medical professionals—yet simple to use—the fully-automatic LIFEPAK CR® Plus AED is designed specifically for the first person to respond to a victim of sudden cardiac arrest.

AED Program Management.Placement of automated external defibrillators (AEDs) is on the rise in workplace and community settings. Having an AED at your business, school, gym or community center is the first step in giving those who visit your facility a better chance to survive sudden cardiac arrest. But just having the AED on site does not ensure your staff is ready to use the device or that the AED itself is in proper working condition.Click here to learn about Heart Safe Solutions.

A safer place to live, work, and play. Whether its victims are young or old, at the office or in class, worshipping, exercising or just walking to an airport gate, sudden cardiac arrest (SCA) knows no boundaries.

But no matter where or when it strikes, early use of a defibrillator can help save lives. In fact, it’s proven to be the only effective treatment for ventricular fibrillation (VF), a potentially fatal heart rhythm associated with SCA. With the simple, powerful, AHA Guidelines–consistent CR Plus and an emergency response plan, you’ll be creating a safer environment.

At hand and ready.

Having an AED in place is no comfort if you can’t be sure it will work when it’s needed. The LIFEPAK CR Plus AED conducts weekly and extended monthly automatic self-tests, initialization tests each time it is powered on, and a series of concurrent tests throughout the time the device is in operation. A visible readiness display with four clear indicators allows you—and anyone who uses it— to know it’s ready to do its job. And unlike AEDs that run off of external batteries that degrade over time, the SafeGuard Owner System—unique in the industry—offers a dual layer of security as the CHARGE-PAK™ battery charger keeps the robust internal battery at its optimum level during the life of the unit.

It’s never been simpler to be prepared.

The LIFEPAK CR Plus AED is easy for you to manage. The battery charger and electrodes have a synchronized replacement cycle that makes your maintenance program efficient and affordable. Of course, you hope the LIFEPAK CR Plus AED will never be needed in a lifesaving situation, but when it is, you can be confident that your staff is as ready as the AED. AED users should be trained in CPR and use of the AED. We offer a variety of training options to continually educate your response team, from onsite instruction and a LIFEPAK CR Plus AED training unit to online AED/CPR refresher training, videos, and quick reference cards.

 


CR Plus / Express battery & electrode installation video instructions from Paul Mendoza



Defibrillator
Waveform: Biphasic truncated exponential,
with voltage and current duration compensation
for patient impedance.*
Output Energy Sequence: Multiple levels, configurable
from 150 joules to 360 joules (200 joules min for Japan).
Factory default settings of 200J, 300J, 360J.
Output Energy Accuracy: ±10% into 50 ohms,
±15% into 25 to 100 ohms.
Shock Advisory System: An ECG analysis system
that advises whether a shock is appropriate; meets
rhythm recognition criteria specified in DF39.
The device charges for shock only when the Shock
Advisory System advises defibrillation.
Device Capacity:
Typical: Thirty (30) full discharges or 210 minutes
of “on time” with a fully charged device.
Minimum: Twenty (20) full discharges or 140 minutes
of “on time” with a fully charged device.
Shock Charge Time: Charge times with a fully charged
device: 200 joules in less than 9 seconds, 360 joules
in less than 15 seconds.
System Recharge Times: Recharge times with a fully
discharged device: Able to deliver 6 shocks or provide
42 minutes of operating time after 24 hours of recharge
time and 20 shocks or 140 minutes of operating time
after 72 hours of recharge time with a new
CHARGE-PAK at temperatures above 15° C (59° F).
Controls:
Lid Release/ON-OFF—Controls device power.
SHOCK button (semi-automatic version)—delivers
defibrillation energy. After electrodes are attached
to a patient, the fully automatic version of the
device delivers a shock, if appropriate, not requiring
operator intervention.
Electrical Protection: Input protected against
high voltage defibrillator pulses per
IEC60601-1/EN60601-1.
Safety Classification: Internally powered equipment.
IEC60601-1/EN60601-1.

User Interface
User Interface: The user interface includes voice
prompts, audible tones and graphic prompts.
Readiness Display: The readiness display shows the
device status.
OK Indicator: Shows “OK” when the last self-test was
completed successfully. When the “OK” indicator is
visible, all other indicators are not visible. The “OK”
indicator is not displayed during device operation.
ChARgE-PAK Indicator: When displayed, replace
the CHARGE-PAK™ battery charger.
Attention Indicator: When first displayed, at least six (6)
discharges or 42 minutes of operating time remain.
Service Indicator: Service required when displayed.

Environmental
Note: All performance specifications defined assume
the unit has been stored (two hours minimum) at
operating temperature prior to operation.
Operating Temperature: 0° to +50° C (+32° to +122° F).
Storage Temperature: -40° to +70° C (-40° to +158°
F) with CHARGE-PAK and electrodes, maximum
exposure time limited to one week.
Atmospheric Pressure: 760 mmHg to 429 mmHg,
0 to 15,000 feet above sea level.
Relative humidity: 5 to 95% (non-condensing).
Water Resistance: IEC60529/EN60529 IPX4 “Splash
proof” with electrodes connected, CHARGE-PAK installed.
Shock: MIL-STD-810E, Method 516.4, Procedure 1,
(40g, 6-9 ms pulse, 1
/2 sine each axis).
Vibration: MIL-STD-810E, Method 514.4, Helicopter -
category 6 (3.75 Grms) and Ground Mobile - category
8 (2.85 Grms).
Physical Characteristics
height: 10.7 cm (4.2 in).
Width: 20.3 cm (8.0 in).
Depth: 24.1 cm (9.5 in), excluding handle.
Weight: 2.0 kg (4.5 lb) with CHARGE-PAK and electrodes.
Default Settings
Energy Sequence: Energy sequence is set to 200J,
300J, 360J.
Motion Detection: The motion detection system is set
to on during analysis.
Energy Protocol: The energy protocol is set to
increase energy only after a lower energy shock was
unsuccessful.
Stack Shocks: Stack shocks option is set to off.
Turn-On Prompt: The turn-on prompt is set to provide
voice prompts upon power on.
CPR Time: The CPR Time is set to 120 seconds.
Voice Prompt Volume: The voice prompt volume is
set to high.

Accessories
ChARgE-PAK Battery Charger
Type: Li/SO2Cl2 Lithium Sulfuryl Chloride, 11.7V,
1.4 amp-hours.
Replacement: Replace the CHARGE-PAK battery
charger and QUIK-PAK™ electrodes packet after
using the defibrillator, if the CHARGE-PAK symbol
appears in the readiness display or when the Use
By date is reached (typically 2 years).
Weight: 80.5 grams (0.18 lb).
QUIK-PAK Electrode Pads
Pads: ECG is received from disposable defibrillation
electrodes, standard placement (anterior-lateral).
Pads Packaging: User intuitive, rapid release
QUIK-PAK electrodes allow the electrode pads to
be preconnected to the device and protected under
a top cover.
Pads Replacement: Replace every two (2) years.
Infant/Child Reduced Energy Defibrillation Electrodes:
For use on infants and children less than 8 years of age
or less than 55 lbs (25kg).

Data Storage
Memory Type: Internal digital memory.
ECg Storage: Dual patient data storage. Minimum
20 minutes of ECG stored for the current patient,
summarized data stored for the previous patient.
Report Types:
• Continuous ECG – A continuous patient ECG report.
• Continuous Summary report – A summary of critical
resuscitation events and ECG waveform segments
associated with these events.
• Event Log report – A report of time stamped
markers, which reflect operator and device activity.
• Test Log report – A device self-test activity report.
Capacity: Minimum 200 time-stamped event log markers.
Communications: Wireless transfer to a personal computer.
Data Review: Physio-Control provides an array of tools
to meet customer needs for data viewing and analysis.
* The specifications apply from 25 to 200 ohms.
Voltage compensation is limited to the voltage that
would result in delivery of 360 joules into 50 ohms.
All specifications are at 20° C unless otherwise stated.

Click here for brochure



Contact us for Consultation today!
Google+ >> >>